background image

Check one:

Same owner, name and/or address has changed

New owner, purchased vehicle used

Same owner, additional driver who should receive product/safety updates

Mr.

Mrs.

Ms.

Miss

Dr.

Owner Information Change Form

E V V

First name

M.I.

Last name

Company name

Street address or P.O. Box

Apt. or suite number

City

State

Zip code

Home phone number

Work phone number

Extension

Vehicle Identification Number (required to process change)

Mo.

Day

Year

/

/

Check here if 
address below
is for company   

This information is obtained solely for the use of Toyota Motor Sales, U.S.A., Inc.
Toyota occasionally sends special promotional offers to registered owners. Check here if you prefer not to receive these offers.

/

Effective date of
this information

Social Security Number
(optional; for Toyota customer reference only)

If your name 

or address has

changed or you

purchased your

Toyota as a used

vehicle, please

complete and 

mail the attached

card, even if your

warranty coverage

has expired. This

will enable Toyota

to contact you

with important

product or safety

updates concern-

ing your vehicle. 

If the card is no

longer attached,

please call the

Toyota Customer

Assistance Center at

(800) 331-4331.

Содержание 2003 MR2 Spyder































































































































































































































































































































Отзывы: