TOX PRESSOTECHNIK Powerpackage Q Series Скачать руководство пользователя страница 18

Страница: 18 / 80

About this product

TOX_Manual_Powerpackage_line-Q_en

3.1.2

Foreseeable misuse

Use contrary to intended use includes the following foreseeable misuse:

Operation under conditions that deviate from the technical data.

Operation without fully assembled and functional connections.

Operation without fully assembled and functional safety devices.

Modifications to the product without prior approval by the TOX

PRES-

SOTECHNIK and the approving authority.

Incorrect parameterization.

Execution of activities by persons who are not qualified or authorized to
do so.

The operating company is exclusively responsible for all personal injury and
property damage resulting from non-intended use. Non-intended use will
not be covered by the warranty or the operating approval of the complete
plant.

3.2

Product Identification

3.2.1

Position and content of the type plate

Designation on the type plate

Meaning

Type

Product designation

No.

Serial number

ΔV [ml]

Lowering volume
Indicates the amount of oil that must be
discharged again after completely filling.

max

Maximum pressure

Type code structure

Type key

Description

X-S 008. 3030. 100. 12

X-S

008. 3030. 100. 12

Identifies the series type such as X-S, S, K, etc.

X-S

008

. 3030. 100. 12

Indicates the press force in [tons].

X-S 008.

3030

. 100. 12

Indicates the version.

X-S 008. 3030.

100

. 12

Indicates the length of the total stroke.

X-S 008. 3030. 100.

Indicates the length of the power stroke.

3.3

Function description of Powerpackage

See Design and installation guideline.

Содержание Powerpackage Q Series

















































































Результаты поиска

Содержание Powerpackage Q Series

Отзывы:

TOX PRESSOTECHNIK Powerpackage Q Series, Оригинальная инструкция по эксплуатации, Страница: 18 / 80

Результаты поиска

Содержание Powerpackage Q Series

Отзывы: