TOX PRESSOTECHNIK Powerpackage Q Series, Оригинальная инструкция по эксплуатации, Страница: 15 / 80

Safety
TOX_Manual_Powerpackage_line-Q_en
15
2.3.6 Electromagnetic hazards
Electromagnetic hazards must be observed in the area of electromagneti-
cally vibrating or oscillating components.
Regular work on and with electromagnetically vibrating or oscillating com-
ponents can lead to disturbances in the blood circulation of the fingers as
well as neurological and motoric dysfunctions.
Basically applies:
Ÿ
Use antivibration gloves according to EN ISO 10819:1997 for neces-
sary work!
Ÿ
Electromagnetic fields can influence pacemakers (PM) and other im-
plants through indirect effects. Avoid possible malfunctions.
2.3.7 Laser
Depending on the model and features, lasers can be installed for the pur-
pose of recognition. There is a danger of looking into the laser in some situ-
ations. If this is not avoided, eye injuries may result.
2.3.8 Hazardous substances
The following safety requirements apply when handling chemical sub-
stances:
Ÿ Observe the applicable safety regulations on handling chemical sub-
stances and the information on the manufacturer's safety data sheets
of hazardous substances.
Ÿ
Wear individual protective equipment.
Ÿ
In the event of eye or skin contact, rinse the affected area, change con-
taminated clothing and visit a doctor if necessary. Provide appropriate
equipment (eye wash bottle, washbasin) near the workplace.
Ÿ
Groundwater hazardous substances must not get into the ground or
sewage system. Collect groundwater hazardous substances and dis-
pose of them properly.