TOX PRESSOTECHNIK Powerpackage Q Series Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 80

TOX PRESSOTECHNIK Powerpackage Q Series Скачать руководство пользователя страница 17

About this product

TOX_Manual_Powerpackage_line-Q_en

17

3 About this product

3.1

Intended use

The hydropneumatic drive performs the strokes that are generally defined
as fast approach stroke, power stroke and return stroke. The drive is in-
tended for installation in machines or robot tongs with the following techni-
cal applications:

Installing, pressing

Punching, pressing (of function elements)

Riveting, crimping, flaring

Punching, piercing

Embossing, marking

Tensioning, clamping, crimping

Pressing, compressing

Clinching, joining

This incomplete machine may not be commissioned until it has been ascer-
tained that the incomplete machine in which the component is to be in-
stalled complies with the requirements of the Machinery Directive (2006/42/
EC).

3.1.1

Safe and correct operation

Intended use includes the following conduct:

Only operate with the components for which it is specified.

Follow all instructions in this operating manual.

Comply with the specified maintenance intervals and perform mainte-
nance work correctly.

Operate in compliance with the conditions of the technical data.

Operation with fully assembled and functional safety devices.

Activities may only be carried out by persons who are qualified or au-
thorized for this purpose.

Any other use or application beyond this does not come under the scope of
intended use.

«
...
15
16
17
18
19
...
»

Содержание Powerpackage Q Series

















































































Отзывы:

Нет отзывов