tousek
/ E_SWING-X_42001005 / 06. 02. 2012
- 3 -
1. General
Swing gate operator SWING-X
Characteristics
• electromechanical swing gate operator for 230V a.c.
• gate weight max. 500kg (per wing)
• self-locking gear mechanism
• high-grade bronze worm wheel
• emergency release lockable with standard half cylinder
• torque sensor
• adjustable internal limit stops (mechanical)
• adjustable soft stop
• automatic reverse system ARS
• suitable for subsequent installation
• elegant design
•
General features
The swing gate operator TOUSEK SWING X, can be easily installed at new and also already existing swing gate facilities
For the development of the SWING X electromechanic operator the main objective was set upon reliability and long durability.
For this reason all parts are made of premium materials such as aluminium, stainless or galvanised steel.
Also the whole gearing which is placed in a diecast aluminium housing as well as the drive unit are entirely made of metal. This
ensures long lasting trouble-free operation.
The drive/operator is gimbal-mounted on both gate and column side. This enables an absolutely free of play installation of the
operator as well as smooth and even movement of the gate.
An extremely massive spindle together with a spindle socket made of brass ensures a long lasting and reliable operation.
Of course the spindle is supported on both sides. This prevents unwanted vibrations.
A torque sensor enables the use of the automatic reverse system (ARS). When touching an obstacle the operator stops and
reverses automatically. This guarantees a high degree of safety.
the operator closes the gate reliably. The emergency release which is important in case of power failure is lockable with a stan
-
dard profile half cylinder. It can therefore be replaced and integrated into an already existing house key system. The cylinder
and 3 keys are included as standard equipment.
The operators ensure the blocking of the gate and therefore usually do not need the use of electric locks.
To obtain a fixed detention of the gate in the end positions it can also be useful for blocking gate operators - according to the
installation- to install an additional locking device such as e.g. a electronic lock.
In order to avoid a limit stop on the floor - which can be dangerous and annoying - the operator has a built-in mechanical limit
stop.
Technical data
Swing gate operator
SWING-
X3/1 X3/1LH X4/1 X4/1LH X5/1LH
X3/1
X3/1LH
X4/1
X4/1LH
X5/1LH
Power supply
230Va.c., 50Hz
Motor condensator
10µF
Max. wing width
3m
4m
4,5m
5m
max. stroke
320mm 450mm
320mm
450mm
Max. wing weight
500kg
travel speed
14mm/s
11mm/s
Operating factor
(mode
S3)
40%
Thrust
4000N
5000N
6500N
Ambient
temperature
-20° bis +40°C
Article no.
11260310 11260340 11260360 11260370 11260420
Other
blocking in open and closed position • force adjustment through control unit • emergency release lockable through
standard half cylinder • adjustable Anschläge • torque sensor
optional:
boltable motor attachment brackets for gate and column (galvanised or stainless steel)
Note: Max. wing widths do neither apply to full-panel gates (but to stave or trellised gates) nor to non-horizontal gates
