Total TS42142101, Руководство пользователя

Страница: 9 / 18

Rotating lower blade guard
The rotating lower blade guard (5) protects both sides of the blade (fig. G). It retracts
onto the upper blade guard (4) when the saw is lowered into the work piece.
On and off
1. To turn on the machine, press and hold the on/off trigger switch (16) (fig. H).
2. To turn off the saw, release the On/Off Trigger Switch (16).
Square the table with the blade
1. Make sure the electrical plug is disconnected from the outlet.
2. Push the saw arm (1) down to its lowest position and engage the spindle (2) to
hold the saw arm in the transport position.
3. Loosen the miter locks (15).
4. Rotate the table (12) until the pointer is positioned at 0º.
5. Tighten the miter locks (15).
6. Loosen the bevel lock (7) and set the saw arm (1) to a 0º bevel (blade at 90º to
the miter table). Tighten the bevel lock (7).
7. Place a square against the table (12) and the flat part of the blade (fig. J).
Note. Make sure the square contacts the flat of the saw blade, not the teeth.