Total TS42142101, Руководство пользователя

Страница: 2 / 18

Security instructions
To use this equipment correctly, you must observe the safety regulations, assembly and
operation instructions within this manual.
All those people who use and repair the machine must be familiar with the manual and
informed of occupational hazards.
Children and untrained persons may not use the miter saw. Also, those children should
be out of the work area.
It is also essential to observe the accident prevention regulations and apply them in the
area where the equipment is to be used. The same applies to occupational health and
safety regulations and rules.
Caution
Whenever you use a power tool, follow safety precautions to reduce the risk of fire,
electric shock, and injury to persons.
It is also necessary to take into account the advice contained in the safety instructions
section.
The machine must be used under all prescribed start-up and safety instructions, but
bearing in mind that it is not possible to eliminate all risk factors. The following risks may
arise during the assembly and use of the machine:
• Saw blade contact
•
Kickback of machine or other work parts
•
Saw blade fracture
• Hearing damage if you don't wear proper protection
•
Harmful emissions of sawdust when the equipment is used inside closed areas
without ventilation. Always use dust extractors and dust extraction.
•
Always unplug the power cord before making any adjustments or maintenance
to the equipment, including changing the blade.
To make the correct and safe use of the machine, follow the following rules:
• Select the proper blade for the material to be cut.
•
Do not use the saw to cut materials other than those indicated by the
manufacturer
•
The machine can be moved by the main handle as long as it is not connected to
the current and the blade is in a firm position, blocked and with the protection
cover.
•
Make sure the saw arm is in the correct position.
• Keep the machine on a level area, in good condition, and free of debris.
•
Provide adequate lighting while working.
• Make sure you are trained in the use, adjustment and operation of the machine.
•
Use properly sharpened blades and observe the maximum speed indicated.
• Do not handle any material in the cutting area until the blade guard is in the safe
position and the blade is fully locked.
• Make sure the machine is fixed to the worktable.
•
When pieces to be cut exceed the width of the worktable, be sure to use supports
at the same level as the worktable on both ends of the pieces.
Said support must be positioned so that the piece to be cut does not fall to the
ground after the cut. If the piece to be cut is extremely long, position several
supports.