Total TS42142101, Руководство пользователя

Страница: 11 / 18

Place the fence square with the table
1. Make sure the machine is unplugged.
2. Push the saw arm (1) down to its lowest position and engage the spindle (2) to
hold the saw arm in the transport position.
3. Loosen the miter locks (15).
4. Rotate the table (12) until the pointer is positioned at 0º.
5. Tighten the miter locks (15).
6. Using a 5mm hex wrench, loosen the two screws that hold the depth stop (11) to
the base (fig. N).
7. Place a square against the guide or depth stop (11) and next to the blade (fig.
O).
8. Adjust the fence (11) until it is square with the blade.
9. Tighten the screws that hold the guide (11).
10. Loosen the Phillips head screw holding the miter scale pointer (13) and adjust it
so that it accurately indicates the zero position on the miter scale (fig. P).
11. Retighten the screw that holds the miter scale indicator.