Total TS42142101, Руководство пользователя

Страница: 7 / 18

Warning
Do not lift the saw while it is locked, use the work handle (3)
Transport
Raise the miter saw only when the saw arm is locked in the down position, the machine
is turned off, and the plug is unplugged.
Lift the saw only by the handle (3) or the outer protection covers.
Mounting
The base of the saw has holes in each corner to facilitate bench mounting (fig. B).
1. Place the miter saw on a level horizontal bench or work
table using bolts (not included) and attach the saw to the
bench using 4 bolts.
2. If desired, the machine can be mounted to a piece of
13mm or thicker plywood which can then be clamped to
your work support or moved to other job sites and re-
clamped.
Caution
Make sure the mounting surface is not deformed, as an uneven surface can cause
binding and inaccurate sawing.
Axis
Shaft (2) is provided to hold the cutting head down while the miter saw is being
transported or stored (fig. C). The machine should never be used with the release knob
locking the head down.