Toshiba Z30-B Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 149

background image

the electronic accessories including the supplied power adapter, the Radio
Equipment and Telecommunications Terminal Equipment Directive 1999/5/
EC in case of implemented telecommunication accessories and the Low
Voltage Directive 2006/95/EC for the supplied power adapter. Furthermore
the product complies with the Ecodesign Directive 2009/125/EC (ErP) and
its related implementing measures.
This product and the original options are designed to observe the related
EMC (Electromagnetic Compatibility) and safety standards. However,
TOSHIBA cannot guarantee that this product still observes these EMC
standards if options or cables not produced by TOSHIBA are connected or
implemented. In this case the persons who have connected/implemented
those options/cables have to provide assurance that the system (PC plus
options/cables) still fulfils the required standards. To avoid general EMC
problems, the following guidance should be noted:

Only CE marked options should be connected/implemented
Only best shielded cables should be connected

Working environment

This product was designed to fulfil the EMC (Electromagnetic Compatibility)
requirements to be observed for so-called “Residential, commercial and
light industry environments”. TOSHIBA do not approve the use of this
product in working environments other than the above mentioned
“Residential, commercial and light industry environments”.
For example, the following environments are not approved:

Industrial Environments (e.g. environments where a mains voltage of
380 V three-phase is used)
Medical Environments
Automotive Environments
Aircraft Environments

Any consequences resulting from the use of this product in working
environments that are not approved are not the responsibility of TOSHIBA.
The consequences of the use of this product in non-approved working
environments may be:

Interference with other devices or machines in the near surrounding
area.
Malfunction of, or data loss from, this product caused by disturbances
generated by other devices or machines in the near surrounding area.

Therefore TOSHIBA strongly recommend that the electromagnetic
compatibility of this product should be suitably tested in all non-approved
working environments before use. In the case of automobiles or aircraft,
the manufacturer or airline respectively should be asked for permission
before use of this product.
Furthermore, for general safety reasons, the use of this product in
environments with explosive atmospheres is not permitted.

User's Manual

1-4

«
...
5
6
7
8
9
...
»

Содержание Z30-B






















































































































































Отзывы:

Нет отзывов

Похожие инструкции для Z30-B

Бренд: Gateway Страницы: 10

Бренд: Gateway Страницы: 87

Бренд: AMILO Страницы: 70

Бренд: MAXDATA Страницы: 44

Бренд: EUROCOM Страницы: 90

Бренд: Dell Страницы: 56

9410-2829 - Aspire

Бренд: Acer Страницы: 108

5330 2339 - Aspire - Celeron 2 GHz

Бренд: Acer Страницы: 13

5810TZ-4274 - Aspire

Бренд: Acer Страницы: 13

Бренд: Acer Страницы: 34

5738 6969 - Aspire - Core 2 Duo 2.2 GHz

Бренд: Acer Страницы: 13

6493-6495 - TravelMate - Core 2 Duo 2.4 GHz

Бренд: Acer Страницы: 15

6293-6640 - TravelMate

Бренд: Acer Страницы: 14

5735Z PMD T3400

Бренд: Acer Страницы: 6

6593-6325 - TravelMate - Core 2 Duo 2.53 GHz

Бренд: Acer Страницы: 14

Бренд: Acer Страницы: 12

5100-5033 - Aspire - Turion 64 X2 1.6 GHz

Бренд: Acer Страницы: 112

Бренд: Acer Страницы: 137

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды