Toshiba TM5-E01, Руководство пользователя

Страница: 44 / 164

G
et
ti
ng
s
ta
rt
e
d
42
Getting started
Charging the battery
You need to fully charge the battery before you can
switch your Toshiba phone on for the first time.
The battery will only achieve optimum performance
after two or three complete charges.
You can charge your battery in the following two
ways:
1. Plug the AC adapter into an AC outlet and
connect it to the charger connector on your
Toshiba phone. When the battery is fully
charged, unplug the AC adapter from the AC
outlet and disconnect it from the phone
charger connector by gripping it tightly and
pulling gently.
or
2. Connect your Toshiba phone to a PC with the
USB cable.
Low battery indicator
When the battery charge level is running low, a
warning tone sounds and the Battery Low message
is displayed repeatedly. If the battery charge level
runs too low for normal operation, your Toshiba
phone will automatically switch off.
Battery information
Battery performance depends on many factors,
such as your Service Provider's network
configuration, signal strength, the temperature of
the environment in which you operate your Toshiba
phone, the features and/or settings you select and
use, items attached to your phone's connecting
ports, and your voice, data, and other program
usage patterns.
TIP:
For information on checking your battery
status, refer to the Power management
settings
subsection in
Settings
.
NOTE: It is recommended that you save the
data in your phone memory to a PC or storage
card. The manufacturer is not responsible for
data lost or altered due to battery discharge.
TIP: For information on optimising the power
performance of your Toshiba phone, refer to
the
Power management settings and
Backlight settings
subsections in
Settings
.