manualshive.com logo in svg

Toshiba Satellite P20-25 Series, Руководство по обслуживанию

Поделиться
Скачать
Toshiba Satellite P20-25 Series Скачать руководство пользователя страница 205

Appendix A  

 

Appendix A  Handling the LCD Module 

Precautions for handling the LCD module 

The LCD module can be easily damaged during assembly or disassembly. Therefore, please 
observe the following precautions when handling it: 

 

1.  When installing the LCD module in the LCD cover, be sure to seat it so that it is 

properly aligned and maximum visibility of the display is maintained. 

 

 

2.  Be careful to align the holes at the four corners of the LCD module with the 

corresponding holes in the LCD cover before securing the module with screws.  
Do not force the module into place, because stress can affect its performance. 

Note: The panel’s polarized surface is easily scarred, so handle it carefully. 

 

Satellite P20-25 Series Maintenance Manual 

 

A-1

 

Содержание Satellite P20-25 Series



























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды