Toshiba Portege M400-144 Скачать руководство пользователя страница 226

Страница: 226 / 255

User’s Manual

D-2

TOSHIBA RAID

Windows Manual Setup

Use the following procedures when manually setting up Windows.

Before Setting Up Windows

Before setting up Windows, create the TOSHIBA RAID Driver Disk and

configure the BIOS setup program.

Creating the TOSHIBA RAID Driver Disk

1. Connect the USB floppy disk drive and insert a floppy disk.
2. From the

start

menu, select

TOSHIBA Application Installer

and click

the

Next

button.

3. Select the

TOSHIBA RAID Driver

and click the

Install

button.

4. Specify the folder and click the

Unzip

button.

The driver file will be copied to the floppy disk.

Configuring the BIOS Setup Program

In the RAID ARRAY setting of the BIOS setup program, set the built-in HDD

to 1RAID-0.
It is not necessary to change the setting if it has already been set as such.
Refer to the

Starting, Modifying and Ending the BIOS Setup Program

, in

this chapter.

Windows Setup Procedure

1. Insert the Windows Setup CD-ROM into the CD-ROM drive and boot up.

The Windows Setup program will start.

2. When the message "

Press F6 if you need to install a

third party SCSI or RAID driver

" appears on the screen,

press the

key.

3. When the message "

Setup will load support for the

following mass storage device(s):

" appears on the

screen, press the

key and install the TOSHIBA RAID Driver using the

TOSHIBA RAID Driver Disk that was created.

4. Follow the onscreen instructions to continue Windows setup.

■

Please use only hard disk drives supported by the computer. Correct

operations cannot be guaranteed if other hard disk drives are used.

■

The following types of applications might not work correctly:

■

Applications that directly access the hardware and read/write to the

hard disk drive.

■

Using an OS such as Linux to run applications that read/write to the

hard disk drive.

Содержание Portege M400-144
































































































































































































































































Результаты поиска

Содержание Portege M400-144

Отзывы:

Похожие инструкции для Portege M400-144

Бренды по названию

Популярные бренды

Toshiba Portege M400-144, Руководство пользователя

Результаты поиска

Содержание Portege M400-144

Отзывы:

Похожие инструкции для Portege M400-144

Бренды по названию

Популярные бренды