No. Part name
Procedure
Remarks
④
NOTE 2
Be sure to wire as before.
2.
Attachment
1)
Mount the noise filter P.C. board in the electrical parts
box as before.
2)
Be sure to wire in the
electrical
parts box as before.
Check if there is no missing or contact failure
of the connectors.
3
) Attach the electrical parts box cover as before.
NOTE 1
P.C. board
Screw A
- 84 -
Noise filter
P.C. board
MCC-1551
1.
Detachment
1)
Perform 1 of
①
to remove the electrical parts box
.
2) Remove the connector of the below No. from the P.C.
First unlock the housing and then remove the
connectors.
CN01 : Power supply (Red wire)
CN02 : Power supply (White wire)
CN03 : Power supply (Red wire)
CN04 : Power supply (White wire)
3)
Remove the screw of the ground wire.
4)
Unlock the card edge spacers (4 position) in the
electrical parts box to remove the noise filter P.C. board
.
board
.
NOTE
CN01
CN02
CN03
CN04
Ground
screws
Power supply
