Toshiba Magnia 3135R, Руководство пользователя

Страница: 73 / 227

Connecting Hardware Devices
Peripheral Devices
73
Removing and Replacing the CD-ROM Drive
Removing a CD-ROM Drive
1 Remove the diskette drive housing as outlined in “Removing the Diskette Drive."
2 Remove the three screws holding the drive to the chassis.
3 Disconnect the power and data cables from the drive.
4 Slide the drive tray out of the front of the chassis.
5 Remove the CD-ROM from the CD-ROM tray.
6 If you are not re-installing the same drive, place the drive in an anti-static protective
wrapper.
7 Re-install the diskette drive housing as outlined in "Installing the Diskette Drive."
Replacing a CD-ROM Drive
1 Remove the new CD-ROM drive from its protective wrapper and place it on an anti-
static surface.
2 Set any jumpers and/or switches on the drive according to the drive manufacturer’s
instructions.
3 Attach the CD-ROM drive to the CD-ROM tray using the mounting screws supplied
with the system.
4 Slide the slim-line CD-ROM tray into the CD-ROM bay.
5 Connect the CD-ROM IDE cable and power cables to the connector at the back of
the CD tray.
6 Reinstall the diskette drive as outlined in the section “Re-Installing the Diskette
Drive.”
7 Insert the recessed retention screws through the access holes in the top of the drive
bay housing.
8 Insert the retention screw on the front of the chassis.