Toshiba Magnia 3135R, Руководство пользователя

Страница: 44 / 227

Getting Started
Connecting AC Power
44
❖
Are all jumper and switch settings on add-in boards and peripheral devices set
correctly? To check these settings, refer to the manufacturer’s documentation. If
applicable, ensure that there are no conflicts. For example, two add-in boards sharing
the same interrupt.
❖
Are all SDRAM DIMMs installed correctly?
❖
Are all peripheral devices installed correctly?
❖
Are all integrated components from the tested components lists? Check the tested
memory, and chassis lists, as well as the supported hardware and operating system
list on the Toshiba Customer Support Web site at
http://www.toshiba.support.com.
Power Consumption Checklist
Before connecting the server to an AC outlet, make sure the power source has sufficient
current capacity to satisfy the power requirements of the server system. If the system’s
power consumption exceeds the capacity of the power source, the server can be
damaged.
❖
Always connect the server to a grounded AC outlet.
❖
Never connect the server to the same AC outlet as an appliance that has a high
power consumption or that generates electrical noise, such as an air conditioner or
photocopier.
To connect the server to an AC power source:
1 Plug the power cable into the connector on the back of the server.
2 Plug the power cable into an AC outlet or, preferably, the power output connector of
a UPS.
HINT: Use a UPS to avoid losing data when an unexpected power failure occurs.
WARNING: Be sure to use the power cable supplied with the server. Using another
power cable could create a fire hazard.