Getting Started
Environmental Considerations
20
❖
Never install the server in any of the following places:
-
Where it will be exposed to direct sunlight
-
Where it will be exposed to vibration or shock
-
Near any devices that generate a strong magnetic field or produce radio
frequency noise such as a radio, TV, large motor or loudspeaker
-
Where the temperature and humidity change constantly; for example, near an air-
conditioning vent, fan, heater or heat source
-
Near liquids or corrosive chemicals
If debris or liquid gets in the server, shut it down immediately by turning the power button
Off and unplugging the power cable from the AC outlet. Do not turn the server back on.
Contact an authorized Toshiba Magnia service provider immediately.
Operate the server under the following temperature and humidity conditions:
Ambient temperature
:
The operating temperature of the server, when installed in an equipment rack,
must not go below 5 °C (41 °F) or rise above 32 °C (89 °F).
Relative humidity
:
30% to 80% Rh (no condensation)
Ventilation
:
The equipment rack must provide sufficient airflow to the front of the server to
maintain proper cooling. It must also include ventilation sufficient to exhaust a
maximum of 1,500 BTU per hour for each server. The rack selected and the
ventilation provided must be suitable to the environment in which the server is
used.
To avoid damage from condensation when the room temperature is too high or too low,
wait about an hour before turning the server on. The delay allows the server to adjust to
the ambient room conditions.
CAUTION: Avoid exposing the server to condensation during use and storage.
Condensation can corrode server components and short-circuit its electrical circuits
if the unit is on.
Содержание Magnia 3135R
