Toshiba Magnia 3135R, Руководство пользователя

Страница: 41 / 227

Getting Started
Installing the Rail Rack and Mounting the Server
41
5 Attach all four rail brackets to the cabinet rack. Be sure that the sharper angled side
of each bracket is facing up (C in Figure Step 5). Use eight mounting screws
provided by the manufacturer of the cabinet rack. In the illustration to the right, the
left photo (A in Figure Step 5) shows the left-front bracket attached to the cabinet,
while the right photo (B in Figure Step 5) shows the left-rear bracket. (The illustration
shows the rails inside the brackets. You should not have the rails attached inside the
brackets yet.)
Figure: Step 5
6 Attach the system side rail outer pieces (total of two) to the rail brackets you installed
in step 5. To attach the front part of an outer piece to a rail bracket, you must reveal
the access hole (A in Figure Step 6) by sliding the innermost piece toward the back.
Once you see the access hole, align it with the slot in the rail bracket in order to
secure the bolt. Do not tighten the nut and bolt until you have aligned the rear portion
of the rail system (see Step 7).
FIgure: Step 6
A
C
B
B
A
C