Toshiba Magnia 3135R, Руководство пользователя

Страница: 66 / 227

Connecting Hardware Devices
CPU Modules
66
12 If you are installing two processors, you must install a voltage regulator module
(VRM) as shown below, and secure it with the locking tabs.
Installing a VRM
13 Reinstall the access cover, reconnect all signal and power cables.
14 Press the Power button to turn on the server.
CAUTION: If you install only one processor in a system, it must go into the primary
connector (closest to the PCI slots). With a single-processor configuration, you
must install a termination board and termination latch assembly in the empty
secondary connector to ensure proper operation of your system. A termination
board is provided with your system.
TECHNICAL NOTE: If the server is running Windows NT, you may need to reinstall
and/or configure Windows NT to support a dual-processor configuration. For more
information, refer to your operating system documentation.
CPU modules with different cache sizes or clock speeds cannot be used together.
When you add a CPU module, make sure that it is the same speed as the existing
CPU module.
B
A
C
Primary CPU socket Secondary CPU socket