8
Installation
Appendix
Configuration
Definitions
Introduction
How to Use
Be sure to use only the supplied AC adapter. Using a different AC adapter may
cause the camera to malfunction, heat up, or catch fire. Before using the AC
adapter, carefully read and observe the Important Safety Instructions ( → page 4)
and the notes below.
Plug the AC adapter into the 100-240 VAC outlet.
•
If inserting it into other than 100-240 VAC outlet, it may result in electric shock
or fire hazard.
Do not repair, modify or disassemble the AC adapter. It may result in electric
•
shock or fire hazard.
Keep the blades of Plug free from any dust or dirt. Neglecting to do so may cause
•
a fire due to deterioration of the insulation. Pull out the power plug from the outlet
before cleaning the blades.
Do not cover or wrap the AC adapter with a cloth or place it near heating devices.
•
It may cause fire or malfunction of the unit.
Protect the power cord from being:
•
• damaged, modified for extension, or applied heat.
• pulled, put heavy objects, or pinched.
• bent, twisted extremely, or bundle.
Neglecting to do so may cause electric shock or fire hazard.
Do not expose this AC adapter to water.
•
Install the AC adapter properly on a wall or ceiling after plugging in the AC
•
adapter. Avoid dropping the AC adapter, failing to do so may cause serious
personal injury or death.
Do not allow the connectors on the AC adapter to come into contact with any
•
other metal object as this may result in short circuit.
To connect the AC adapter, firmly insert the plug end of the cable into the AC
•
adapter jack. Do not insert the plug into other jacks as this may cause a malfunc-
tion.
When removing the connection cable, disconnect the cable by holding its plug. Do
•
not disconnect the cable by pulling on the cable.
Do not drop the AC adapter or subject it to strong impact.
•
Do not use the AC adapter in hot and humid places.
•
Do not use the supplied AC adapter with devices other than this camera.
•
Temperature increasing on the surface of the adapter is normal. Before moving
•
the adapter to another location, unplug it from the wall outlet, and wait until its
temperature decreases.
Buzzing noises may come from inside. This does not indicate malfunction.
•
Using the AC adapter near a radio, TV, or cellphone may cause interference. Use
•
the adapter at sufficient distances from these devices.
Be sure to use the supplied AC adapter. Using different AC adapter may cause
•
fire hazard or the camera to malfunction.
AC adapter
㪊㪊㩷㪆㩷㪈㪍㪇
