44
Installation
Appendix
Introduction
How to Use
Configuration
Definitions
Access list
This section explains how to control the access permission by checking the client
PC's IP addresses. It contains of the following four segments: Allowed list, Denied
list, Delete allowed list, and Delete denied list.
Allowed list or Denied list
There are two lists for permission control: Allowed list and Denied list. Only those
clients whose IP addresses are in the Allowed list and not in the Denied list can
access the Network Camera.
1. In the Allowed list or Denied list column, type the starting IP address and ending
IP address in the text boxes. A total of ten lists can be configured for both
columns.
2. Click Add to take effect.
NOTE
For example, when the range of the allowed list is set from 1.1.1.0 to 192. 255. 255. 255
●
and the range of the denied list is set from 1.1.1.0 to 170. 255. 255. 255, Only users' IP
located between 171.0.0.0 and 192. 255. 255. 255 can access the Network Camera.
Allowed
List
Denied
List
Delete allowed list / Delete denied list
1. In the Delete allowed list or Delete denied list, select a list from the drop-down list.
2. Click Delete to take effect.
Configuration Definitions (Cont.)
㪍㪐㩷㪆㩷㪈㪍㪇
