47
Installation
Appendix
Introduction
How to Use
Configuration
Definitions
Privacy mask
Click Privacy Mask to open the Privacy Mask page. In this page, you can block out
some sensitive zones for privacy concerns.
IK-WB70A
IK-WB70A
■ To set the privacy mask windows, follow the steps below:
1. Click New to add a new window.
2. To resize and drag-drop the window, which is recommended to be at least twice
the size of the object (height and width) you want to cover.
3. Enter a descriptive Window Name and click Save to take effect.
4. Select Enable privacy mask to enable this function.
NOTE
Up to 5 privacy mask windows can be set in the same screen.
●
If you want to delete the window, please click on the x at the upper right-hand corner of
●
the window to close the window.
Sensor Settings
Click Sensor Settings to open the Sensor Settings page. In this page, you can set
the exposure level, AGC, WDR (Wide Dynamic Range), night mode, and IR cut filter.
㪎㪉㩷㪆㩷㪈㪍㪇
