Toshiba HVR16-X, Руководство по эксплуатации

Страница: 38 / 124

26
4.3 Motion
1. Select Camera – Selects the current camera to be edited.
2. Sensitivity – Adjusts the sensitivity within the designated Motion Areas.
3. Clear – Clears all Motion Areas for the selected camera.
4. Regular Interval Recording – This option allows you to record a single frame every few minutes or every few
hours to show that the DVR is still functioning even when motion is not taking place. This option only works
when Motion recording or Sensor recording is selected.
5. Full Screen Pop-Up on Sensor – When Sensor (alarm input) is detected, the camera will display full screen.
The video will not atomically return to normal view. This option will require a user reset the screen to normal
view.
6. Beep on Detect – When motion is detected, an internal speaker on the DVR will sound an alarm.
7. Full Screen Pop-Up – When Motion is detected, the camera is displayed full screen. The video will not
atomically return to normal view. This option will require a user reset the screen to normal view .
8. Alarm Output – Allows you to activate a specified control output when Motion is detected.
9. Post Alarm (SENSOR) – Allows you to record video after a Sensor event has ceased for a specified period of
time. This option will only work for cameras set to record from a Sensor Event.
10. Post Alarm (MOTION) – Allows you to record video after Motion has stopped for a specified period of time.
This option will only work for cameras set to record using Motion Detection
11. Pre-Alarm – Allows you to record a section of video just prior to Motion or Sensor activation.
Figure 4.3
2 1
9
3
10
4 5 6 7
8
11