Toshiba e-STUDIO190F, Руководство по обслуживанию

Страница: 165 / 299

165
Note:
1. The contents of the Function Parameter List may vary depending on the country’s regulations.
2. “ * ” mark will be shown on the left side of number when setting was changed from default.
Function Parameter List (Sample)
************* -FUNCTION PARAMETER- ************* DATE MMM-dd-yyyy ***** TIME 12:07 ***P.02
-TOSHIBA -
***** ****************** - - ****** -12345678901234567890- ***********
100 ---------- 150 ----------
101 ---------- 151 ----------
102 ---------- 152 ----------
103 ---------- 153 ----------
104 ---------- 154 ----------
105 ---------- 155 ----------
106 ---------- 156 ----------
107 ---------- 157 ----------
108 ---------- 158 ----------
109 ---------- 159 ----------
110 MAC Address: 08002301D3E5160 ----------
111 ---------- 161 ----------
112 Insert EMAIL TXT:[Off] Off 162 ----------
113 ---------- 163 ----------
114 ---------- 164 ----------
115 Time Zone:[Direct] Direct165 ----------
116 Overwrite Warning:[Yes] Yes 166 ----------
117 ---------- 167 ----------
118 ---------- 168 ----------
119 ---------- 169 ----------
120 ---------- 170 ----------
121 ---------- 171 ----------
122 LDAP:[On] On 172 ----------
123 ---------- 173 ----------
124 ---------- 174 ----------
125 ---------- 175 ----------
126 ---------- 176 ----------
127 ---------- 177 ----------
128 ---------- 178 ----------
129 ---------- 179 ----------
130 ---------- 180 ----------
131 ---------- 181 ----------
132 ---------- 182 ----------
133 ---------- 183 ----------
134 ---------- 184 ----------
135 ---------- 185 ----------
136 ---------- 186 ----------
137 ---------- 187 ----------
138 ---------- 188 ----------
139 ---------- 189 ----------
140 ---------- 190 ----------
141 ---------- 191 ----------
142 ---------- 192 ----------
143 ---------- 193 ----------
144 ---------- 194 ----------
145 ---------- 195 ----------
146 ---------- 196 ----------
147 ---------- 197 ----------
148 ---------- 198 ----------
149 ---------- 199 ----------
Note: The power must be reset for the new parameter settings to take effect.