
150
5.1.6.
F7 Mode: Electronic Counter
Set the machine to Service Mode and press "7" key on the Keypad.
↓
Press the "START" key.
↓
Enter the desired code number or press “V”, ”/\” arrow keys.
↓
If you wish to select another code number, scroll the menu with the arrow keys.
↓
Press the "SET" key.
↓
Enter the desired function code number and press “SET” key.
↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.
↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys sequentially to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
F7 Mode
No.
Item
Remarks
01
Key Operator ID Code
Key Operator’s identification code for access to the
counter mode.
02
Total Count
Total count for all copies / prints.
03
PM Count
Preventive Maintenance count.
04-05 Not Used
06
OPC Drum Count
PM count of recording paper fed through the OPC
Drum.
07
Process Unit Count
PM count of recording paper fed through the
Process Unit.
08
ADF PM Count
PM count of originals fed through the ADF.
09-10 Not Used
11
Sheet Bypass Count
Total count of paper fed from the sheet bypass.
12
1st Paper Tray Count
Total count of paper fed from the 1st paper tray.
13
2nd Paper Tray Count
Total count of paper fed from the 2nd paper tray.
14-15 Not Used
16
2-sided Count
Total count of 2-sided Print.
17
ADF Count
Total count of originals fed through the ADF.
18
ADF Read Count
Total count of originals scanned through the ADF.
19-20 Not Used
21
Copy Print Count
Total count of copies printed.
22
Copy Scan Count
Total count of copies scanned.
23
PC Print Count
Total count printed from PC.
24
PC Scan Count
Total count scanned to PC.
25
Fax Transmit Count
Total count of Fax transmitted.
26
Fax Receive Count
Total count of Fax received.
27
Fax Print Count
Total count of Fax printed.
28-29 Not Used
30
A4R / LTR Count
Total count of A4-R / Letter-R Print.
Содержание e-STUDIO190F
