Toshiba DP120F, Руководство по обслуживанию

Страница: 642 / 706

DP120F/DP125F Troubleshooting 11-30 March 2000 © TOSHIBA TEC
1.6.3 MEMORY WRITE [MENU], [9], [5], [03]
This setting is used to change the contents of a specific backup RAM address (using a 6-digit
HEX code). Enter the desired address from the dial keypad, and then press the [ENTER] key.
The address is incremented by pressing the [ENTER] key.
WARNING: Under normal circumstances it is not necessary to make changes to
the memory write addresses. It is recommended that changes to these
settings be made only in response to a specific instruction from a
Toshiba service representative, service bulletin, or other publication.
(1) Use the [
↑
] or [
↓
] key to select "03.MEMORY WRITE," and then press the [ENTER] key.
(2) Enter the desired 6-digit address for inputting data, and then press the [ENTER] key.
<Remarks> To enter the value, use the following keys,
0 to 9:
Dial keys
A to F: One touch key 01 to 06
<Remarks> Be sure to enter the address in the range from 000000 to FFFFFF in HEX
code.
(3) Enter the data, and then press the [ENTER] key.
(4) The screen then increments to the next address. After setting, press the [STOP] key to
return to the standby mode screen.
MEMORY WRITE
ADDRESS =
MEMORY WRITE
ADDRESS =XXXXXX
DATA = YY
MEMORY WRITE
ADDRESS =XXXXXX
DATA = ZZ