Toshiba DP120F, Руководство по обслуживанию

Страница: 641 / 706

March 2000 © TOSHIBA TEC 11-29 DP120F/DP125F Troubleshooting
1.6.2 SET FUNCTION [MENU], [9], [5], [02]
This sets basic functions of this machine in general functions, telephone functions (for each
country/region), dialing functions, access digits, etc. Each table lists the applicable functions
for 8 bits. The setting operation is performed by entering 1 or 0 in each bit to set its function.
The following shows the functions that can be set. For further details, refer to “Service Setting
in Test Mode” in “Chapter 4 Function Settings” on page 4-59.
The setting functions are as follows.
• FUNC 0 to 39
Parameters of general functions. (Refer to 4-61.)
• PCFUNC 0 to 7
Parameters related to PC interface functions. (Refer to 4-119.)
• HOME 0 to 2
Tables of data on scanning system. (Refer to 4-128.)
• UAD 0 to 19, 2 UAD 0 to 19
Parameters of special functions used to adjust the unit to the telephone specifications of
each country/region. (Refer to 4-132 or 4-163.)
• EX TYPE 1, 2 EX TYPE 1
Parameters related to telephone exchange functions. (Refer to 4-160 or 4-191.)
• ACC DGT 1 to 2, 2 ACC DGT 1 to 2
Parameters related to access digits functions. (Refer to 4-161 or 4-192.)
(1) Use the [
↑
] or [
↓
] key to select “02. SET FUNCTION”, and then press [ENTER] key.
(2) Using the following keys, select the function to be set.
• Press the [ENTER] key to set the parameter and display the next function’s parameter.
• Press the [
→
] key to move the cursor to the next bit.
• Press the [
←
] key to move the cursor to the previous bit. If already at bit 7 (left digit), the
[
←
] key will display the previous function’s parameter.
• Press the [0] key to set the selected bit to “0.”
• Press the [1] key to set the selected bit to “1.”
(3) After setting, press the [STOP] key to return to the stand by mode screen.
←
Displays the numeric value currently set (cannot be
changed).
←
Displays the numeric value to be entered now (can only be
altered at the point of the blinking cursor).
SET FUNCTION
FUNC0 =XXXXXXXX
XXXXXXXX
Bit 7 Bit 0
01/12