82
Chapter 9: Troubleshooting
LED indications
The POWER and Service LED lights on the front of the
TV indicate the TV’s status, as described below.
Touch Sensor (POWER LED)
• Blue
The TV is operating properly.
• No light
The power is off or standby.
• Blue blinks
- System booting. After a while, the screen appears.
- Fan Stopped. Turn off the TV and unplug the power
cord. After 1 minute, plug the power cord in again
and turn on the TV.
• Red blinks
Power-On Failure. Turn off the TV and unplug the
power cord. After 1 minute, plug the power cord in
again and turn on the TV.
Touch Sensor (except POWER LED)
• White
Sensor is available.
Service LED
•
Green blinks
(if applicable)
Abnormal operation of BUS line. Turn off the TV and
unplug the power cord. After 1 minute, plug the
power cord in again and turn on the TV.
3D IR
• Red
3D mode is used.
If the problem persists after trying the solutions:
•In the U.S., visit TAIS Consumer Solutions on the web
at
www.support.toshiba.com
or call 1-800-631-3811.
•In Canada, locate the nearest Toshiba authorized
service depot by directing your web browser to
www.toshiba.ca
; click “Support,” and then click
“Home Entertainment.”
Power
Touch Sensor
INPUT
MENU
VOL
CH
Service LED
3D IR
TV front