Toshiba B-EX6T Series Скачать руководство пользователя страница 142

Страница: 142 / 160

141

* When CFG files is selected, the message included in the CFG file is shown prior to the confirmation

display.

5. After confirming the data copy, the printer reads data from USB memory.

6. It takes about 3 to 5 minutes to read all data.

7. Copied Data

When saving other model

’s data is attempted, only the parameter settings are read. In this case,

parameters not supported by the destination printer are inapplicable. It takes about 3 seconds to copy

data.

* B-EX6T1/T, B-EX6T1-G, B-EX6T3-Tand B-EX6T3-G are regarded as the same model.

* B-EX4T1-T and B-EX4T1-G are regarded as the same model.

8. Copied Data of Parameters

Parameters not supported by the destination printer are read, but not applied. Also, even if the

destination printer has the same parameters with the source printer, options may be different.

9. When an error occurs during an access to the USB memory, the error message described in Section

9.12 USB MEMORY is displayed. The printer does not retry the operation.

9.12.2 PRINTER TO USB

・

ALL

Notes:

1. The firmware (BOOT/MAIN/CG/KANJI/HTML), storage area data, and parameter settings are copied to

the USB memory.

2. When an item to be saved is selected, the confirmation display is shown and the data is stored in the

USB memory. It takes about 40 seconds to copy all data.

3. A file is automatically created in the USB memory and named in the following format based on the

printer model and the date of creation.

/ATA0/SYSTEM/B-EX6T1-T1105.DAT (e.g. B-EX6T Type1 305dpi model, Nov. 5)

If a file with the same name already exists in the USB memory, it will be overwritten.

4. When the error occurs during an access to the USB memory, the error message described in Section

9.12 USB MEMORY is displayed. The printer does not retry the operation.

Содержание B-EX6T Series

































































































































































Результаты поиска

Содержание B-EX6T Series

Отзывы:

Похожие инструкции для B-EX6T Series

Бренды по названию

Популярные бренды

Toshiba B-EX6T Series, Спецификация ключевых операций

Результаты поиска

Содержание B-EX6T Series

Отзывы:

Похожие инструкции для B-EX6T Series

Бренды по названию

Популярные бренды