Toshiba A03-009 Скачать руководство пользователя страница 6

Страница: 6 / 219

Warning Indications on the Air Conditioner Unit
[Confirmation of warning label on the main unit]

Confirm that labels are indicated on the specified positions
If removing the label during parts replace, stick it as the original.

Warning indication

Description

WARNING

ELECTRICAL SHOCK HAZARD

Disconnect all remote electric power supplies before servicing.

WARNING

Moving parts.
Do not operate unit with grille removed.
Stop the unit before the servicing.

CAUTION

High temperature parts.
You might get burned when removing this panel.

CAUTION

Do not touch the aluminium fins of the unit.
Doing so may result in injury.

CAUTION

BURST HAZARD

Open the service valves before the operation, otherwise there might be the
burst.

CAUTION

Do not climb onto the fan guard.

Doing so may result in injury.

Содержание A03-009




























































































































































































































Результаты поиска

Содержание A03-009

Отзывы:

Похожие инструкции для A03-009

Бренды по названию

Популярные бренды

Toshiba A03-009, Руководство по обслуживанию

Результаты поиска

Содержание A03-009

Отзывы:

Похожие инструкции для A03-009

Бренды по названию

Популярные бренды