Toshiba 65/5560, Руководство по обслуживанию

Страница: 18 / 75

65/5560 ADJUSTMENT MAY.1997 © TOSHIBA CORP. 2-14
Code Name Allowable Initial
No. Input values Value
62 Lens position(200%) 0~99 50
63 Mirror position(200%) 0~99 50
64 Lens position(50%) 0~99 50
65 Mirror position(50%) 0~99 50
68 Automatic adjustment of – –
remaining paper quantity
indication(no paper loaded)
69 Automatic adjustment of – –
remaining paper quantity
indication( paper loaded)
70 Remaining paper quantity 0~31 3
indication(LCF/no paper
loaded)
71 Remaining paper quantity 0~31 2
indication(upper cassette
/no paper loaded)
72 Remaining paper quantity 0~31 2
indication(middle cassette/
no paper loaded)
73 Remaining paper quantity 0~31 2
indication(lower cassette/
no paper loaded)
74 Remaining paper quantity 0~31 4/3**
indication(LCF/ paper
loaded)
75 Remaining paper quantity 0~31 2/3**
indication(upper cassette
/paper loaded)
76 Remaining paper quantity 0~31 4/8**
indication(middle cassette/
paper loaded)
77 Remaining paper quantity 0~31 7/3**
indication(lower cassette/
paper loaded)
79 Carriage control of the 0~2 –
leading edge of the image
80 Aligning value(LCF) 0~15 8
81 Aligning value(manual) 0~15 8
82 Aligning value(PFP) 0~15 7
83 Aligning value(ADD) 0~15 7
84 ADF aligning value(1st 0~15 8
page)
85 ADF aligning value(2nd 0~15 8
page)
Contents
Each time the numerical value is increased by "1",the
lens moves approximately 0.2mm toward the
enlargement direction.
Each time the numerical value is increased by "1",the
lens moves approximately 0.1mm toward the
enlargement direction.
Each time the numerical value is increased by "1",the
lens moves approximately 0.2mm toward the
enlargement direction.
Each time the numerical value is increased by "1",the
lens moves approximately 0.1mm toward the
enlargement direction.
Remove all of the paper from the LCF and PFP cassettes
when the adjustment is performed.
Install 4,000 sheets of paper in the LCF and the 500
sheets of paper in each of the PFP cassettes when the
adjustment is performed.
These adjustments are made manually when the
remaining paper quantity becomes down to half or less.
After the adjustment of code 68 is performed,conduct
these adjustments if necessary.
In case the variational ratio of the remaining paper
quantity indication is slower than the decrease ratio of
the actual quantity of sheets of paper,increase the
numerical value.
(Example)When" "symbol suddenly changes to
" "symbol.
These adjustments are made manually when more than
half of the paper remains.After the adjustment of code
69 is perfomed,conduct these adjustments if necessary.
In case the remaining paper quantity indication is
displayed as greater than the actual quantity of sheets
of paper,increase the numerical value.
(Example)" "symbol should be actually displayed,but
" "symbol is displayed.
**LT series/A4 series
0:Normal control
1:To slow down the acceleration to the leading edge of
the image.
2:To increase the pre-scanning amount to the leading
edge of the image.
Each time the numerical value is increased by"1",the
amount of slack increases by approximately 1.9 mm.
Each time the numerical value is increased,the original
moves toward the paper feed side.
Each time the numerical value is increased,the original
moves toward the exit side(original stopper side).
**Europe (A4 series) / U.S.A. and Canada (LT series)