Toshiba 65/5560, Руководство по обслуживанию

Страница: 39 / 75

2-58 MAY.1997 © TOSHIBA CORP. 65/5560 ADJUSTMENT
(4) Slide the transparent cover for the cassette
size label to the right to remove it.
(5) Replace the cassette size label with one for
the new paper size and then reinstall the
transparent cover.
(6) Slide the cassette info the copier and tighten
the 2 stopper screws.
(2) Remove the cassette side walls at the front
and rear(2 screws each), move them to the
paper size marked on the cassette guides,
and then tighten the screws.
(3) Remove the back plate(1 screw), move it to
the paper size marked on the base frame, and
then tighten the screw.
Feed side
Exit side
Stopper screw
Fig. 6.2-3
Stopper screw
Screws Screws
Cassette
Cassette guide
Back plate
Cassette side walls
Transparent cover
Cassette
2.27.2 PFP paper size
Mechanical change
(1) Pull out the cassetle to be changed, take out the stopper screw(1 screw each for feed and exit sides)
and then remove the cassette from the copier.
When shipped, the 7650/7550 is set for A4-R/LT-R in the upper cassetle,A3/LG in the middle
cassetle, and A4/LD in the lower cassetle. However,use the following procedure to change the size
if requested to do so by the user.
Return Skip
76/7560 S/H