Toshiba 65/5560, Руководство по обслуживанию

Страница: 19 / 75

65/5560 ADJUSTMENT MAY.1997 © TOSHIBA CORP. 2-15
Each time the numerical value is increased by "1", the
amount of slack increases by approximately 1.9 mm.
Each time the numerical value is increased, the gap
between originals increases.
Each time the numerical value is increased, the original
shifts to the paper supply side on the copier (that is,
moves away from the original stopper). This is carried
out after adjustment "87"(ADF aligning value).
The auto-toner adjustment value is indicated.
This value can be changed.
0~31 :Negative calibration:Max.-5.35sec./month/step
32~63:Positive calibration:Max.+10.7sec./month/step
0,32 :Correction deactivated
Code Name Allowable Initial
No. Input values Value
86 Aligning value 0~15 7
(long size paper/upper cassetle)
87 ADF aligning value 0~15 8
(2in1 original gap)
88 ADF leading edge position 0~15 8
(in 2in1 mode)
90 Auto-toner sensor 0~255 128
adjustment value
99 Real-time clock adjustment 0~63 0
Contents