Toshiba 65/5560, Руководство по обслуживанию

Страница: 16 / 75

65/5560 ADJUSTMENT MAY.1997 © TOSHIBA CORP. 2-12
Adjustment Code List ("05")
•
The larger the value,the larger the sensor output,
•
About 3 minutes after this mode has been started,this
value changes automatically to make the sensor output
2.45V~2.55V.
•
The larger the value,the lighter the image.
•
The adjustment sequence must be
1
→
2
→
3
→
4
→
5
→
6
→
7
→
8
→
9
→
10.
The larger the value,the lighter the light range.
The smaller the value,the darker the dark range.
•
The larger the value,the lighter the image.
•
The adjustment sequence must be 14
→
15
→
16
→
17.
Each time the numerical value is increased by "1",the
reproduction ratio in the movement direction increases
by approximately 0.15%.
Range;-1.17%(reduction)to +1.05%(enlargement)
Each time the numerical value is increased by"1",the
reproduction ratio in the movement direction increases
by approximately 0.10.
Range:-0.77%(reduction)to +0.69%(enlargement)
Each time the numerical value is increased by"1",the
heat roller motor speed increases by 0.06%.
Range:-0.75%(reduction)to +0.71%(enlargement)
Each time the numerical value is increased by "1",the
image shift moves 0.5mm toward the trailing edge of
the paper without changing the position of the image
relative to the paper.
Motor ratings can be adjusted by the following ranges:
0:-1.19% 1:-1.03%
2:-0.88% 3:-0.73%
---------- ----------
---------- 13:+0.76%
14:+0.91% 15:+1.06%
Code Name Allowable Initial
No. Input values Value*
0 Auto-toner sensor 0~255 128
1 Manual exposure(100%) 0~255 128
2 Manual exposure(154%) 0~255 128
3 Manual exposure(50%) 0~255 128
4 Manual exposure(200%) 0~255 128
5 Manual exposure(100%) 0~255 128
6 Manual exposure(154%) 0~255 128
7 Manual exposure(50%) 0~255 128
8 Manual exposure(200%) 0~255 128
9 Allowable exposure step 0~255 128
range(light)
10 Allowable exposure step 0~255 128
range(dark)
14 Manual photo exposure 0~255 128
(100%)
15 Manual photo exposure 0~255 128
(154%)
16 Manual photo exposure 0~255 128
(50%)
17 Manual photo exposure 0~255 128
(200%)
20 Aligning roller speed 0~15 10
adjustment
21 Drum speed adjustment 0~15 12
22 Heat roller speed adjustment 0~15 8
25 Leading edge of image shift 0~15 8
(100%)
26 Leading edge of image shift 0~15 8
(200%)
27 Leading edge of image shift 0~15 8
(50%)
28 PFP motor speed 0~15 8
Contents
*The initial value means the one that is set by the BC-RAM initialize program, and does not mean the one set at the
factory before shipment.