Toshiba 43C350KE, Руководство пользователя

Страница: 7 / 37

5
Getting Started
Installing the Stand or Wall Mount Bracket
Accessories List
The following accessories are included with TV:
OWNER’S MANUAL Base Stand × 2 Remote Control × 1
AAA Battery × 2 Screw × 4 Power Cord × 1
RCA jack to
AV Cable × 1
Wall mount hole pattern (mm)
200 × 300 (43”/50”/55”)
400 × 300 (65”)
Wall mount screw size M6
8.0 - 10.0 mm (43”/50”/55”)
9.5 -11.5 mm (65”)
Wall Mount Bracket
Wall Mount Screw
Wall Mount Spacer
Rear cover of the TV
Follow instructions provided with the wall mount bracket.
NOTE
• The diameter and length of the screws differ depending on the wall
mount bracket model.
• Wall mount bracket is optional. Your TV may not have wall mount bracket.
Please refer to the actual accessories.
Installing the Wall Mount Bracket
NOTE
• The accessories may be different from the list above due to different
models, countries/regions. Please refer to the actual accessory bag.
CAUTION
When mounting the TV on a wall, follow instructions provided with the
wall mount bracket. If it is not correctly mounted, the TV may fall and cause
property damage or personal injury.
Before mounting the TV, remove the TV stand if you have already attached it,
and make sure the wall mount bracket supports the weight of your TV.
Place spacers between the TV and bracket.
Make sure the tilt angle between the TV
screen and the vertical surface is no more
than 15 degrees.
Standard dimensions are shown below.
≤15°
TV screen
Vertical
surface
CAUTION
• Be sure to disconnect the AC power cord before installing a stand or
Wall-Mount brackets.
• The display on your TV is fragile. Make sure the TV screen is not
scratched or damaged by hard objects or from pressure.
• After the installation is complete, make sure the TV is steady on a table
or firmly attached to a wall mount, before removing all protective film,
if any.
Installing the Stand
1. Carefully place your TV face-down on a soft, flat surface to prevent
damage to the TV or scratching to the screen.
2. Remove the Base Stand from the accessory bag and then insert the
stands into the bottom slots of the TV.
3. Secure the Base Stand to the TV with the screws in accessory tightly.
NOTES
• Insecure installation may cause the tilt or falling of the product, and
further lead to personal injuries or product damages.
• P-Clip and corresponding screws may not included with TV set. Please
purchase them by yourself if necessary.
• The picture is only for reference.
Installing the P-Clip
1. Fix the larger side of P-Clip to the screw hole on the back of TV set with a
M6×12 screw.
2. Fix the other side of P-Clip to the wall or pillar with a ST4×25 screw.
Base Stand
Screws: M4×16 (43")
M4×12 (50"/55")
Base Stand
Base Stand
Screws: M5×12 (65”)
43"/50"/55"
65"
Please place the TV on a horizontally stable surface, and then use P-Clip to
connect the TV and the wall or pillar.