21
Installing the remote control
batteries
1
Remove the battery cover from the back of the
remote control.
Squeeze tab
and lift cover.
2
Install two “AAA” size batteries, making sure to
match the + and – signs on the batteries to the
signs on the battery compartment.
3
Reinsert the battery cover in the remote control
until the tab snaps.
Caution:
Batteries must not be exposed to
excessive heat such as direct sunlight, fire,
heaters, or the like.
Note:
•
Be sure to use AAA size batteries.
•
Dispose of batteries in a designated disposal
area.
•
Batteries should always be disposed of with
the environment in mind. Always dispose of
batteries in accordance with applicable laws
and regulations.
•
If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace batteries with new ones.
•
When necessary to replace batteries in the
remote control, always replace both batteries
with new ones. Never mix battery types or
new and used batteries.
•
Always remove batteries from the remote
control if they are dead or if the remote
control is not to be used for an extended
period of time. This will prevent battery acid
from leaking into the battery compartment.
Remote control effective range
For optimum performance, aim the remote control
directly at the TV and make sure there is no
obstruction between the remote control and the TV.
16.4 ft (5m)
Point remote control toward remote
sensor on front of TV.
Chapter 3: Using the remote control
