Toscana LINEAR GRAVITY FILLER, Инструкция по эксплуатации и техническому обслуживанию

Страница: 6 / 34

Instructions handbook 6
If the plate deteriorates with use or is no longer legible, even in only one of its points, you are
advised to ask the manufacturer for another one, stating the data contained in these instructions.
If the declaration of conformity enclosed herewith is not present or has gone astray, it is possible to
ask our offices for a copy of it, stating the machine serial number given on the CE plate on the
machine.
2.0 - References
Manufacturer
Toscana Enologica Mori S.n.c.. - via Cimabue n.4-6 50028
Tavarnelle Val di Pesa (FI)
Tel. 055 8071568 - Fax 055 8071293
Machine name
LINEAR GRAVITY FILLER
Main reference standards
•
Directive 98/37/CE approximation of the laws of member
states concerning machines
•
Machines Directive 459/96 harmonising 89/392/EEC and
subsequent amendments,
•
Directive 91/368/EEC, 93/68/EEC,
•
Directive 89/336/EEC on “Electromagnetic Compatibility”
and law 615 dated 12/11/1996
•
Directive 73/23/EEC on low voltage and bill of parliament
no. 791 dated 18/10/1977
•
UNI EN 292/1, 292/2, 294, 349, 60204-1
Service Centre
Solely c/o the manufacturer’s headquarters
Handbook
MAY 2009
Review
Rev.1
3.0 - Glossary
Hazardous areas Any area inside or in the vicinity of the machine in which the presence of an
exposed person is a hazard to the safety and health of that person.
Exposed person Any person wholly or partly inside a hazardous area.
Operator or worker The person or persons appointed to install, operate, adjust, carry out
maintenance operations, clean, repair or handle the machine.
Expert operator or skilled personnel In charge of set-up and start-up, lubrication, greasing,
routine and extraordinary maintenance, expressly authorised by the “Plant Manager”.
Electrical expert operator or skilled personnel In charge of set-up, start-up and maintenance of
the electrical section expressly authorised by the “Plant Safety Manager”.