Toscana LINEAR GRAVITY FILLER, Инструкция по эксплуатации и техническому обслуживанию

Страница: 5 / 34

Instructions handbook 5
1.0 – Foreword
The machine user shall inform personnel about the risks of accident, devices for operator safety,
risks of noise emission and about the general accident prevention rules set forth by international
directives and the laws in force.
Before starting the operating activities for which the machine is intended, the operator must be
perfectly informed about machine operation, the position of all the controls and the technical
characteristics and purpose of its use.
The machine may only be used by operators who have completely read and understood the
instructions contained herein.
Tampering/unauthorised replacement of parts of the machine, the use of non genuine spares and the
use of consumable materials that do not meet the specifications contained herein may represent a
serious accident hazard and relieve the manufacturer of civil and criminal liabilities.
1.1 – Importance of the handbook
1) Consider the instructions handbook as an integral part of the product
2) Keep the handbook throughout the whole life of the machine
3) Give the handbook to any other machine user
4) The wiring and pneumatic diagrams are enclosed herewith
1.2 - Keeping the handbook
1) Use the handbook in such a way as not to damage its contents either wholly or in part
2) Do not remove, tear or write on parts of the handbook for any reason whatsoever
3) Keep the handbook in a protected place
1.3 - Contents of the handbook
This handbook is defined by specific sections with indications and descriptions that can be traced
through the summary of the specific subjects.
1.4 – Use of the handbook
This handbook is an integral part of the supply.
Any alteration or change or integration to the machine without the manufacturer’s permission is
prohibited.
In the case of sale, hire, transfer for use or financial renting of the machine, the instructions must be
attached to it.
The technical specifications contained herein do not bind the manufacturer and may be changed on
future supplies with no prior notice.
Though it has been written with the utmost care, this handbook cannot entirely replace the
experience of the user, which must, therefore, be adequate for the operations to be performed.
The instructions contained herein do not replace, integrate or modify any of the standards, laws
and/or decrees in force in the place in which the equipment is used.
1.5 – “CE” marking
To guarantee that the equipment complies with the requirements of the Machine Directive
89/392/EEC and subsequent amendments, it has the CE plate as per Annex III of law 459/96.
Never remove the plate from its original position chosen by the manufacturer.
Do not alter or falsify the technical data it contains.
Do not clean the plate with sharp objects (e.g.: metal brushes), to avoid spoiling the above-
mentioned data.