Toscana LINEAR GRAVITY FILLER, Инструкция по эксплуатации и техническому обслуживанию

Страница: 23 / 34

Instructions handbook 23
12.0 - Handling and disposal instructions
WARNING:
Before handling the various parts, it is firstly necessary to check the conditions of preservation of
every piece of equipment used. Only use appropriate equipment that meets current safety
regulations on working equipment.
When handling loads, operators should pay the utmost care to avoid dangerous movements for
themselves and for others.
Use slings and hoisting equipment suited to the weight of the machine to be positioned and take the
machine to be lifted as shown below.
During handling,
adhere to the following instructions to be carried out by duly trained personnel:
1.Before removing the machine, make sure that it is secured to the handling equipment.
2.Place on anchored pallets or carry with crane or bridge crane taking care to tie the component
firmly.
3.During road transport secure the machine with ropes and anything else needed to keep it stable.
4.The width of the corridors must allow the passage of the necessary means of handling (fork lift
trucks, etc.) and in any case leave sufficient space. around the machine.
12.1 – Packing
The machine is delivered packed on pallet. For handling use a trans-pallet or forklift truck.
Upon receiving the machine, place it near its place of work and remove the packing.
The material used for packing does not involve particular environmental hazards as it is composed
of:
•
Polyethylene – Outer film to protect against the weather and blister pack to protect against
shocks.
•
Plastic – Various parts of the packing used to protect against shocks.
•
Wood – Fastening blocks for mechanical parts and container crate.
All’atto del ricevimento posizionare la macchina in prossimità del suo posto di lavoro e liberarla
dagli imballi.
Oltre alla macchina l'imballo contiene gli accessori previsti in ordine e la documentazione tecnica di
accompagnamento.
12.2 – Disposal
National and community regulations impose precise procedures for the disposal of industrial waste
with Law no. 22 of 05/02/1997, which acknowledges directives 91/156/EEC on wastes,
91/689/EEC on hazardous wastes and 94/62/EEC on packing materials and their wastes.
Please be reminded that at the end of its working life the machine must be disposed of as industrial
waste and therefore the collection, sorting, transport, treatment of the wastes and disposal of them
shall be carried out in accordance with current regulations referring to directive 75/442/EEC and its
subsequent amendments.