Instructions handbook
30
16.0 - Specific safety instructions
•
Do not remove any safety device and never attempt to deactivate
their prevention and safety action.
•
Always keep the machine efficient and in good maintenance
conditions.
•
Regularly check, at least once a year that the bolts on the bearing
structures, covers, hatches and motor connections are not slack.
•
Do not place cloths, pieces of fabric or anything else around the
rotary parts of the FILLER.
•
Wash the FILLER only with non-toxic, food-safe products.
•
Before doing any maintenance work or removing the protective
guards, it is mandatory to:
-
Cut off the electrical supplies opening the line switches of
both the main panel and the auxiliary ones giving the
safety padlock key to the persons in charge of the repair.
-
Make sure that the mushroom switches are pressed and
retained.
-
On the control panel place a notice stating “machine
maintenance in progress”
•
Before operating the machine make sure that the electrical supply
system has all the necessary line protections, the cut-off devices
with equi-potential protections have been installed and that the
leads have an adequate diameter and degree of insulation.
•
All personnel who use, service and install the machine must be
aware of the rules of safety and be in perfect psycho-physical
conditions.
•
Access to the machine must be prohibited to all personnel not
expressly authorised to use it.
•
The operator must only use IPDs that comply with directive
89/686/EEC, concerning individual protective devices duly
marked with the CE brand and must adhere to directive
89/656/EEC which defines the procedures for using individual
protective equipment during work.
Содержание LINEAR GRAVITY FILLER
Страница 32: ...Instructions handbook 32 17 1 Filler drawing...
Страница 34: ...Instructions handbook 34...
