Toro Power Plex 51880, Руководство оператора

Страница: 9 / 24

SUPERCEDED
3. Align the tongue of the battery pack with the battery
cavity in the chain saw (
Figure 7 ).
g192108
Figure 7
4. Push the battery pack into the battery cavity until the
battery pack locks into place.
5. Ensure that the chain brake is in the O
PERATING
position ( Figure 8 ).
g192111
Figure 8
1. Chain brake (O
PERATING
position)
2. Chain brake (
STOP
position)
6. With 1 hand on the front handle and the other on the
rear handle, press the trigger lock, then squeeze the
trigger (
Figure 9 ).
g192113
Figure 9
1. Front handle 3. Trigger lock
2. Chain brake 4. Trigger
Shutting Off the Chain Saw
To shut off the chain saw, release the trigger.
Whenever you are not using the saw or are transporting the
saw to or from the work area, move the chain brake to the
S
TOP
position ( Figure 8 ).
Cutting with the Chain Saw
WARNING
Operating a chain saw improperly can cause serious
person injury or death.
Read and follow all operating instructions carefully
to help avoid possible personal injury.
WARNING
Kickback can cause serious or fatal injury to you.
Always ensure that the chain brake system is
working properly before you operate the chain saw.
Avoid touching objects to be cut with the tip of the
chain saw.
There are 2 types of kickback:
•
A fast upward motion of the chain saw that results when
the chain at the nose or top of the bar contacts an object
•
A fast backward motion of the chain saw that results
when the chain at the nose or top of the bar is pinched by
the object being cut
Figure 10 shows the area of the bar to avoid contacting an
object to prevent kickback.
g026070
Figure 10
1. Grip the chain saw with 2 hands, with your left hand
on the front handle and your right hand on the rear
handle as shown in
Figure 11 .
Note:
Keeping your left arm straight with your elbow
locked helps reduce kickback.
9