Toro Power Plex 51880, Руководство оператора

Страница: 8 / 24

SUPERCEDED
Product Overview
g192115
Figure 3
Left Side of Chain Saw
1. Chain 6. Battery pack
2. Guide bar
7. Trigger lock
3. Oil window 8. Trigger (on rear handle)
4. Oil cap 9. Guide bar cover
5. Front handle
g192114
Figure 4
Right Side of Chain Saw
1. Chain brake 3. Wing nut
2. Chain tensioning knob
Operation
Important:
The battery pack does not come fully
charged; refer to Charging the Battery Pack (page 14) .
Before Using the Chain Saw
Before using the chain saw, do the following:
•
Clean and check the chain components for excessive wear
or damage and replace them as needed; refer to
Servicing
the Guide Bar, Chain, and Drive Sprocket (page 17) and
Sharpening the Chain (page 18) .
•
Check the oil level; refer to Checking the Oil Level and
Adding Bar and Chain Oil (page 16) .
•
Check the chain brake; refer to Checking the Chain Brake
(page 16) .
Starting the Chain Saw
1. Make sure that the vents on the chain saw ( Figure 5
and Figure 6 ) are free from dust and debris.
g197204
Figure 5
1. Vent
g197205
Figure 6
1. Vent (inside the battery
cavity)
2. Vent
2. Set the chain saw down on a level surface.
8