Toro Power Plex 51880, Руководство оператора

Страница: 7 / 24

SUPERCEDED
Setup
Filling the Chain Saw with
Bar and Chain Oil
Important:
Use only bar and chain oil.
1. Place the chain saw on a level surface.
2. Clean the area around the oil cap ( Figure 1 ).
g192110
Figure 1
1. Oil cap 2. Oil window
3. Remove the cap and pour oil into the chain saw until
the oil fills the window (
Figure 1 ).
Do not fill the chain saw higher than the bottom of
the fill neck.
4. Clean up any spilled oil and replace the oil cap.
Mounting the Battery
Charger (Optional)
If desired, mount the battery charger securely on a wall using
the wall-mount key holes on the back of the charger.
Mount it indoors (such as a garage or other dry place), near a
power outlet, and out of the reach of children.
Refer to Figure 2 for assistance in mounting the charger.
Note:
Slide and twist the charger over the appropriately
positioned hardware to secure the charger in place (hardware
not included).
g194202
Figure 2
7