•
Slow down and use caution when making turns and
crossing roads and sidewalks. Stop the blades if you are
not mowing.
•
Be aware of the mower-discharge direction and do not
point it at anyone.
•
Do not operate the mower while ill, tired, or under the
influence of alcohol or drugs.
•
Use care when loading or unloading the machine into
or from a trailer or truck.
•
Use care when approaching blind corners, shrubs, trees,
or other objects that may obscure vision.
Safe Handling of Fuels
•
To avoid personal injury or property damage, use
extreme care in handling gasoline. Gasoline is extremely
flammable and the vapors are explosive.
•
Extinguish all cigarettes, cigars, pipes, and other sources
of ignition.
•
Use only an approved fuel container.
•
Do not remove the fuel cap or add fuel with the engine
running.
•
Allow the engine to cool before fueling.
•
Do not fuel the machine indoors.
•
Do not store the machine or fuel container where there
is an open flame, spark, or pilot light, such as on a water
heater or on other appliances.
•
Do not fill containers inside a vehicle, on a truck, or on a
trailer bed with a plastic liner. Always place containers on
the ground away from your vehicle before filling.
•
Remove equipment from the truck or trailer and fuel it
on the ground. If this is not possible, then add fuel with
such equipment as a portable container rather than from
a fuel-dispenser nozzle.
•
Keep the nozzle in contact with the rim of the fuel tank
or container opening at all times until fueling is complete.
•
Do not use a nozzle lock-open device.
•
If you spill fuel on clothing, change your clothing
immediately.
•
Do not overfill the fuel tank. Replace the fuel cap and
tighten securely.
Maintenance and Storage
•
Disengage drives, set the parking brake, shut off the
engine, and remove the key or disconnect spark-plug wire.
Wait for all movement to stop before adjusting, cleaning,
or repairing.
•
Park the machine on a level surface.
•
Clean grass and debris from the cutting unit, drives,
mufflers, and engine to help prevent fires.
•
Clean up oil or fuel spills.
•
Let the engine cool before storing the machine.
•
Do not store fuel near flames or drain fuel indoors.
•
Do not allow untrained personnel to service the machine.
•
Use jack stands to support components when required.
•
Carefully release pressure from components with stored
energy.
•
Disconnect the battery or remove the spark-plug wire
before making any repairs. Disconnect the negative
terminal first and the positive terminal last. Connect the
positive terminal first and negative last.
•
Use care when checking the blades. Wrap the blade(s)
or wear thickly padded gloves, and use caution when
servicing them. Only replace blades; do not straighten
or weld them.
•
Keep your hands and feet away from moving parts.
If possible, do not make adjustments with the engine
running.
•
Keep all parts in good working condition and all hardware
tightened. Replace all worn or damaged decals.
Hauling
•
Use care when loading or unloading the machine into a
trailer or a truck.
•
Use full-width ramps for loading machine into a trailer
or a truck.
•
Tie the machine down securely using straps, chains, cable,
or ropes. Both front and rear straps should be directed
down and outward from the machine.
5
Содержание 74923 Z Master 6000
Страница 67: ...Schematics Wire Diagram Rev A 67 ...
