Toro 74923 Z Master 6000, Руководство оператора

Страница: 48 / 68

Cooling System
Maintenance
Cleaning the Engine Screen
and Engine-Oil Cooler
Service Interval: Before each use or daily
Remove any buildup of grass, dirt, or other debris from the
oil cooler (
Figure 73 ).
G008804
Figure 73
Before each use, remove any buildup of grass, dirt, or other
debris from the engine screen. This helps ensure adequate
cooling, correct the engine speed, and reduces the possibility
of overheating and mechanical damage to the engine (
Figure
74 ).
Cleaning the Engine-Cooling
Fins and Shrouds
Service Interval: Every 100 hours/Yearly (whichever comes
first)
1. Disengage the blade-control switch (PTO) and set the
parking brake.
2. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Remove the air-intake screen, the recoil starter, and
the fan housing (
Figure 74 ).
4. Clean the debris and grass from the engine parts.
5. Install the air-intake screen, the recoil starter, and the
fan housing (
Figure 74 ).
Figure 74
1. Engine guard 4. Fan housing
2. Engine air-intake screen 5. Screw
3. Bolt
48