Toro 74923 Z Master 6000, Руководство оператора

Страница: 23 / 68

position. Now start the engine. While the engine
is running, center either motion control and move
(forward or reverse); the engine should shut off. Repeat
for other motion control.
5. Sitting on the seat, disengage the parking brake,
move the blade-control switch (PTO) to the O
FF
position, and move the motion-control levers to the
N
EUTRAL
-
LOCK
position. Try starting the engine; the
engine should not start.
Using the Motion-Control
Levers
Figure 23
1. Motion-control
lever—neutral-lock
position 4. Backward
2. Center, unlocked position 5. Front of the machine
3. Forward
Driving Forward or Backward
The throttle control regulates the engine speed as measured
in rpm (revolutions per minute). Place the throttle control in
the F
AST
position for best performance. Always operate in
the full throttle position when mowing.
CAUTION
Machine can spin very rapidly. Operator may lose
control of machine and cause personal injury or
damage to machine.
• Use caution when making turns.
• Slow the machine down before making sharp
turns.
Driving Forward
Note:
The engine stops when you move the traction-control
with the parking brake engaged.
To stop, pull the motion-control levers to the N
EUTRAL
position.
1. Release the parking brake; refer to Releasing the
Parking Brake (page 19) .
2. Move the levers to the center, unlocked position.
3. To go forward, slowly push the motion-control levers
forward (
Figure 24 ).
G008952
Figure 24
23