! & " ! !%!! !%#'$
!%!! #"&#
Service Air FIlter Pre-Cleaner
Lubricate All Grease Fittings
Check for Loose Fasteners
Clean Fuel Filter and Sediment Bowl
Adjust Traction Drive Belts
{
Change Engine Oil
Check Cut-Off Bar Adjustment
Service Air Cleaner Filter
Clean Combustion Chamber
Replace Spark Plug
Adjust Valves and Torque Head Bolts
{
Initial break in at 8 hours
Replace All Interlock Switches
Every
25hrs
Every
50hrs
Every
100hrs
Every
200hrs
(See Operator's and Service Manual for specifications and procedures)
!%!! !%#' #'
!!& " !%"!$
The Greensmaster
R
1600 has two identification
numbers: a model number and a serial number. These
numbers are stamped into a plate located on rear of
frame. In any correspondence concerning the unit,
supply the model and serial numbers to ensure correct
information and replacement parts are obtained.
"%
Do not order by reference number if a parts
catalog is being used; use the part number.
To order replacement parts from an authorized TORO
Distributor, supply the following information:
Model and serial numbers.
Part number, description, and quantity of parts
desired.
