Toro 04042, Руководство по диагностике

Страница: 84 / 136

Figure 79
P26 Main Harness Pin Identification
P26 Main Harness Power Connector
Pin Identification Description Wire Color
A 42 to 64 Vdc Power Red (R)
B Ground Black (BK)
3. Check for a short condition between the following pairs of locations:
Location Harness
Connector
Pin
Connector Graphic
1 Battery
adapter
Figure 79
P26 A
2 Battery
adapter
Figure 79
P26 B
A
B
1 Main
Figure 76
P42 1
2 Main
Figure 76
P42 2
1
2
Pass Circuit continuity tested good and no shorts are identified at the listed locations. Go
to Step 10.2 and follow the steps listed.
Fail For those items that failed, repair or replace worn or damaged parts as required. Go to
Returning the Equipment to Service (page 19) and follow the steps listed.
Step 10.2: Check the battery wire harness for continuity and/or a short
condition.
1. Disconnect the battery wire harness P01 connector. Refer to Raise the Battery Pack and Disconnect the P01
Connector (page 8) .
2. Check for continuity between the following pairs of locations:
84