Toro 03781 Скачать руководство пользователя | Manualshive

Страница: 39 / 76

background image

Maintenance Service

Interval

Maintenance Procedure

Every 400 hours

• Change the air filter. Service the air filter earlier if the service indicator shows red.

Service it more frequently in extremely dirty or dusty conditions.

• Check the fuel lines and connections for deterioration, damage, or loose connections.
• Change the fuel-water separator filter.
• Check for end-play in the planetary drives.
• Check the planetary-gear-drive oil level (check if you notice external leakage).
• Check the oil level of the rear axle. (Also check the oil level before you start the

engine for the first time.)

• Check the lubricant in the reduction-gear case. (Also check the lubricant before

you first start the engine.)

Every 800 hours

• Drain and clean the fuel tank.
• Change the front planetary-gear oil or yearly, whichever comes first.
• Change the oil in the rear axle.
• Check the rear-wheel alignment.
• If you are not using the recommended hydraulic fluid or have ever filled the reservoir

with an alternative fluid, replace the hydraulic filters.

• If you are not using the recommended hydraulic fluid or have ever filled the reservoir

with an alternative fluid, change the hydraulic fluid.

Every 1,000 hours

• If you are using the recommended hydraulic fluid, replace the hydraulic filters.

Every 2,000 hours

• If you are using the recommended hydraulic fluid, change the hydraulic fluid.

Before storage

• Drain and clean the fuel tank.

Every 2 years

• Replace the hydraulic hoses.
• Replace the coolant hoses.
• Flush and replace the coolant.

39

«
...
37
38
39
40
41
...
»

Содержание 03781













































































Отзывы:

Нет отзывов

Похожие инструкции для 03781

Бренд: Raven Страницы: 27

Бренд: Raven Страницы: 79

Бренд: Raven Страницы: 88

Бренд: Datavideo Страницы: 50

Бренд: Waterous Страницы: 90

Бренд: Campbell Страницы: 14

Бренд: Eastern Jungle Gym Страницы: 17

Бренд: Vahle Страницы: 96

Бренд: Uchida Yoko Страницы: 40

Бренд: TATU Страницы: 30

Бренд: Rane Страницы: 4

Бренд: Sabio Страницы: 182

Бренд: Teac Страницы: 9

Бренд: Tascam Страницы: 3

Бренд: Tascam Страницы: 56

Portastudio 2488

Бренд: Tascam Страницы: 28

Бренд: Tascam Страницы: 2

Бренд: Tascam Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды