Toro 03781, Руководство оператора

Страница: 20 / 76

Mow-Speed Limiter
When the mow-speed limiter ( Figure 35 ) is rotated
forward, it allows the cutting units to engage and limits
the maximum ground speed during mowing. You
change the position of the spacers to adjust mowing
ground speed. When driving machine between job
sites, rotate the mow-speed limiter back for maximum
transport speed.
Lower Mow/Raise Control Lever
Use the lower mow/raise control lever ( Figure 36 )
raises and lowers the cutting units. The lever also
starts and stops the reels when the reels are enabled
in the mow mode.
Note:
The cutting units cannot be lowered when the
mow/transport lever is in the transport position.
g025902
Figure 36
1. Lower mow/raise control
lever 4. PTO switch
2. Key switch 5. Engine-throttle control
3. InfoCenter 6. Headlight switch
Key Switch
The key switch ( Figure 36 ) has 3 positions: O
FF
,
O
N
/P
REHEAT
, and S
TART
.
InfoCenter
The InfoCenter LCD display shows information about
your machine, such as the operating status, various
diagnostics, and other information about the machine
(
Figure 36 ).
PTO Switch
The PTO switch ( Figure 36 ) has 2 positions: E
NGAGE
and D
ISENGAGE
. Press the PTO button forward to
engage the cutting-unit blades. Press the button back
to disengage the cutting-unit blades.
Engine-Throttle Control
Use the engine-throttle control ( Figure 36 ) to increase
or decrease the engine speed.
Headlight Switch
Press the switch to turn on the headlights ( Figure 36 ).
Power Point
Use the power point ( Figure 37 ) to power optional
12-volt electrical accessories.
g368823
Figure 37
1. Power point 2. Bag holder
Bag Holder
Use the bag holder ( Figure 37 ) for storage.
Backlap Levers
Use the backlap levers to control the cutting unit
rotation direction when backlapping the reels (
Figure
38 ).
g370565
Figure 38
1. Front cutting-unit backlap
lever 2. Rear cutting-unit backlap
lever
20